Pin-Type Wood Moisture Meter

• It reads to a depth of approximately 12mm into the slab
• The current reading can be captured via the hold function
• Easily set the wood species from hardwood to softwood you need to measure
• Offers a Relative Moisture Content (comparative) measurement
• Quickly, easily and affordably find out if pieces of firewood are ready to burn at the woodpile before carrying it in
• Low power requirements enable up to 500 tests on one set of AA batteries
• Power Source: 2 x AA batteries (not included)
• Material: Plastic
• Packaging Dimensions: 13 x 5 x 2cm
• Gross Weight: 300g

Tips:

• Why it read 0%: When the wood slab was too dry to register readings, the wood at this moment is an insulator leading to a non-conductive between the two pins
• For best results of wood moisture content, push the Pins deep into the material; make sure the Pins are in contact with the material (wall, wood or hardwood)
• Pins sense and measure along their full length so that Pins penetrating a dry material through a wet outer surface can read the moisture content